Moroccan industrialists' trust in Steriflow
Steriflow, a presence on Moroccan territory and more for 30 years
With about thirty years presence on Moroccan territory and more than 200 industrial autoclaves installed in the country, Steriflow has once again imposed its superiority on the industrial sterilisation market, of which it is the leader. Since the beginning of 2014, the Moroccan government has granted permission for the construction of 6 fish canning plants in Dakhla, a small town on the Moroccan coast. A challenge launched to revitalize an area of the territory, that is difficult to access in the south. Thanks to its local service and reputation, Steriflow has equipped 5 fish canning companies with Static Steriflow.
Steriflow's proximity and professionalism in Morocco
Steriflow's presence in Morocco enables it to offer a support service to the food industry. Its local partner provides start-up and calibration services, as well as the sale of spare parts for Steriflow industrial autoclaves. Steriflow in Morocco assists manufacturers in obtaining FDA approval and certification for their exports to the United States. Long term presence in an "aggressive" environment proves the robustness and reliability of the machines.
Steriflow Static
Characteristics: Model with overheated water run-off - diameters from 900 mm to 2300 mm, capacity from 1 to 12 baskets depending on model - Suitable for all types of packaging - Short and homogeneous cycles - Reduced maintenance and simplified servicing
See the product
- March 2021 (1)
- December 2020 (3)
- October 2020 (2)
- September 2020 (2)
- August 2020 (1)
- July 2020 (3)
- June 2020 (2)
- April 2020 (1)
- February 2020 (1)
- January 2020 (1)
- December 2019 (1)
- November 2019 (3)
- October 2019 (4)
- September 2019 (1)
- August 2019 (1)
- June 2019 (4)
- April 2019 (1)
- March 2019 (3)
- February 2019 (3)
- January 2019 (5)
- November 2018 (1)
- October 2018 (5)
- September 2018 (6)
- August 2018 (1)
- July 2018 (1)
- June 2018 (1)
- May 2018 (4)
- April 2018 (1)
- February 2018 (2)
- January 2018 (4)
- November 2017 (3)
- October 2017 (4)
- September 2017 (2)
- August 2017 (3)
- July 2017 (1)
- June 2017 (3)
- May 2017 (2)
- April 2017 (4)
- March 2017 (6)
- February 2017 (2)
- January 2017 (1)
- December 2016 (2)
- November 2016 (1)
- September 2016 (7)
- August 2016 (7)
- July 2016 (13)
- June 2016 (5)
- May 2016 (1)
- February 2016 (4)
- January 2016 (13)
- December 2015 (2)
- March 2015 (1)